742
×
![]()
Part of the Control Accessories Series
Ordering Code: 742
UPC: 779655074208
Actuating Motor, 0-10 V (dc)
The Actuating Motor 742 uses a 0-10 or 2-10 V (dc) signal to adjust the position of a mixing valve. It is compatible with tekmar brass mixing valves 710 to 724. It provides 88 in-lbs (10 N-m) of torque over a 90 degree rotation. The rotation direction is selected by a toggle switch.
- Compatible with Tekmar brass mixing valves 710 to 724
- The rotation direction is selected by a toggle switch
- Reversible scale plate
- Manual override
| Specifications | |
|---|---|
| Ambient Conditions | Indoor use only, 32 to 122 degrees F (0 to 50 degrees C), 95 percent RH non-condensing |
| Control Signal Input | 0-10 V (dc) or 2-10 V (dc), selected by switch setting 100 k ohms maximum input impedance |
| Dimensions | 3-5/8" H x 3-1/8" W x 3-9/16" D (93 x 80 x 90 mm) |
| Enclosure Material | Polycarbonate |
| Enclosure NEMA Rating | NEMA 1 |
| Motor Speed | 140 seconds |
| Position Signal Output | 0-10 or 2-10 V (dc), follows switch setting 3 k ohms minimum load impedance |
| Power Supply | 24 V plus / minus 10 percent (ac/dc) 2.5 VA, Class 2 |
| Rated Torque | 88 in-lbs (10 N-m) |
| Rotation Angle | Electrically limited to 90 degree shaft rotation, clockwise or counterclockwise direction selected by switch setting. |