Universal Reset Control 363 - Mixing, Boiler & DHW

The Universal Reset Control 363 is designed to operate all of the mechanical equipment in a residential hydronic heating system. It can be used in applications ranging from a single zone of baseboard with an on/off boiler to multiple fan coils, and low temperature radiant floor zones. It regulates up to two space heating water temperatures through Outdoor Temperature Reset. It is capable of controlling a single on/off boiler, a mixing device (variable speed pump or mixing valve), and domestic hot water or setpoint loads.

Note: There are multiple products which the 363 can replace depending on the application. Some conditions apply; please contact Customer Service for more information.

Features & Specs

Features (definitions)

• 2 outdoor reset controlled water temperatures

• Advanced settings to fine-tune building requirements

• Automatic Boiler Differential

• Boiler Load Reset

• CSA C US certified (approved to applicable UL standards)

• DHW priority (optional)

• DHW pump or valve operation

• Exercising

• Indoor Temperature Feedback (with optional indoor sensor)

• Outdoor Temperature Reset

• Powered boiler system and mixing system pump outputs

• Quick setup for easy installation

• Setback input for energy savings

• Test sequence to ensure proper component operation

• User comfort adjustment to increase or decrease building space temperature

• Variable speed pump control or floating action mixing control

• Warm Weather Shut Down

Specifications

Control	Microprocessor control. This is not a safety (limit) control
Packaged weight	3.9 lb. (1760 g)
Dimensions	6-5/8" H x 7-9/16" W x 2-13/16" D (170 x 193 x 72 mm)
Enclosure	Blue PVC plastic, NEMA type 1
Approvals	CSA C US, meets Class B: ICES & FCC Part 15
Ambient conditions	Indoor use only, 36 to 104°F (2 to 40°C), RH ≤80% to 88°F (31°C), down to 50% above 104°F (40°C), Altitude <6560 ft. (2000 m), Installation Category II, Pollution Degree
Power supply	115 V (ac) ±10%, 60 Hz, 1800 VA
Relays	230 V (ac) 7.5 A, 1/3 hp, pilot duty 240 VA
Var. Pump	230 V (ac) 2.4 A, 1/6 hp, fuse T2.5 A 250 V
Demands	20 to 260 V (ac) 2 VA
Sensors	NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892
-Included	Outdoor Sensor 070 and 2 of Universal Sensor 071
-Optional	tekmar type #: 033, 040, 063, 070, 071, 072, 073, 076, 077, 082, 084
Warranty	Limited 3 Year Warranty

Technical

In most cases the current version of literature will work, otherwise use the piece of literature most closely matching the date code of your product.

Current Literature

Product Submittal	Jan 2011 - Present	363_C
Installation & Operation Manual	Dec 2008 - Present	363_D
User Manual	Jun 1999 - Present	363_U

Applications

Product Application Drawings

Application Brochure

Jun 1999 - Current

363_A

More advanced application drawings can be found in our Solutions section.

Service Bulletins

Active Service Bulletins

RF Noise Interference

May 2009 - Present

SB0054

tekmar Accessory Products (21 total)