Mixing Control 362 - Floating Action / Variable Speed

The Mixing Control 362 is designed to operate either a mixing pump, or mixing valve using Outdoor Temperature Reset. It can be used in applications ranging from in-floor radiant, commercial baseboard systems for boiler protection with full reset, or snowmelt applications to control the slab temperature. This control regulates a single heating water temperature through Mixing Outdoor Reset, or snowmelt operation. It provides mixing by speeding up or slowing down a single permanent capacitor (standard wet rotor) circulator, or by controlling a floating action actuator. It can also provide control of the mix system pump.

Note: There are multiple products which the 362 can replace depending on the application. Some conditions apply; please contact Customer Service for more information.

Features & Specs

Features (definitions)

• Advanced settings to fine-tune building requirements

• Automatic Boiler Differential

• CSA C US certified (approved to applicable UL standards)

• Indoor Temperature Feedback (with optional indoor sensor)

• Outdoor Temperature Reset

• Powered mixing system pump output

• Quick setup for easy installation and programming of control

• Setback input for energy savings

• Snow melting control (Mode 2)

• Test sequence to ensure proper component operation

• User comfort adjustment to increase or decrease building space temperature

• Variable speed pump control OR floating action mixing control

• Warm Weather Shut Down

Specifications

Control	Microprocessor control. This is not a safety (limit) control
Packaged weight	3.7 lb. (1690 g)
Dimensions	6-5/8" H x 7-9/16" W x 2-13/16" D (170 x 193 x 72 mm)
Enclosure	Blue PVC plastic, NEMA type 1
Approvals	CSA C US, meets Class B: ICES & FCC Part 15
Ambient conditions	Indoor use only, 36 to 104°F (2 to 40°C), RH ≤80% to 88°F (31°C), down to 50% above 104°F (40°C), Altitude <6560 ft. (2000 m), Installation Category II, Pollution Degree
Power supply	115 V ±10%, 60 Hz, 900 VA
Relays	230 V (ac) 7.5 A 1/3 hp, pilot duty 240 VA
Var. Pump	230 V (ac) 2.4 A 1/6 hp, fuse T2.5 A 250 V
Demands	20 to 260 V (ac) 2 VA
Sensors	NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892
-Included	Outdoor Sensor 070 and 2 of Universal Sensor 071
-Optional	tekmar type #: 033, 039, 040, 063, 071, 072, 073, 076, 077, 082, 084, 092
Warranty	Limited 3 Year Warranty

Technical

In most cases the current version of literature will work, otherwise use the piece of literature most closely matching the date code of your product.

Current Literature

Product Submittal	Jan 2011 - Present	362_C
Installation & Operation Manual	Dec 2008 - Present	362_D
User Manual	Jun 1999 - Present	362_U

Applications

Product Application Drawings

Application Brochure

Jun 1999 - Current

362_A

More advanced application drawings can be found in our Solutions section.

Service Bulletins

Active Service Bulletins

RF Noise Interference

May 2009 - Present

SB0054

tekmar Accessory Products (20 total)