Snow Melting Control 650 - Pulse Width ModulationDISCONTINUED
The Snow Melting Control 650 is designed to operate mechanical equipment to melt snow off of an outdoor slab. It can be used for any single zone electric or hydronic snow melting application that requires manual start/stop operation. This control uses Pulse Width Modulation (PWM) and slab Outdoor Temperature Reset to maintain slab temperature. It is capable of controlling a pump, valve, or electrical contact while reading outdoor air temperature.
- Features & Specs
Features (definitions)
CSA C US certified (approved to applicable UL standards)
Cold Weather Cut Off
Manual Override
Slab Outdoor Reset
Temporary Idle
Warm Weather Shut Down
Specifications
Control Microprocessor control. This is not a safety (limit) control Packaged weight 1.3 lb. (600 g) Dimensions 4-3/4" H x 2-7/8" W x 7/8" D (120 x 74 x 22 mm) Enclosure White PVC plastic, NEMA type 1 Approvals CSA C US, meets class B: ICES & FCC Part 15 Ambient conditions Indoor use only, -20 to 120°F (-30 to 50°C), RH ≤90% Non-condensing Power supply 24 V (ac) ±10%, 50/60 Hz, 3 VA, 24 V (dc) ±10%, 0.03 A Relays 240 V (ac) 10 A, 1/3 hp Sensors NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892 -Included Outdoor Sensor 070 and Slab Sensor 072 On time 0:30 to 19:50 hours to Infinite' Melting 34 to 45°F (1 to 7°C) Idling Off, 23 to 34°F (Off, -5 to 1°C) CWCO Off, -22 to 23°F (Off, -30 to -5°C) Temperature display Fahrenheit / Celsius Warranty Limited 3 Year Warranty - Technical
In most cases the current version of literature will work, otherwise use the piece of literature most closely matching the date code of your product.
Current Literature
Product Submittal
Jan 2011 - Present
Installation & Operation Manual
Aug 2010 - Present
- Applications
-
Product Application Drawings
Application Brochure
Aug 2010 - Current
More advanced application drawings can be found in our Solutions section.
tekmar Accessory Products (2 total)
These are typical products that add more functionality to the Snow Melting Control 650
