The Programmable Thermostat 512 is a microprocessor based control designed to operate mechanical equipment to deliver heating and cooling to a single zone within a hydronic heating system. It can be used with any terminal unit type, including radiant floor, baseboard, and fan coils. This product maintains very accurate and even air temperature with Pulse Width Modulation and Auto Cycling. It is capable of controlling a zone valve or zone pump directly or through a tekmarNet® 4 Wiring Center or Zone Manager, as well as a cooling device, to maintain air temperature and 2 auxiliary temperatures. These temperatures could be floor or remote air.
2 auxiliary sensor inputs
Auto Heating Cycle
CSA C US Approved for use in USA and Canada
Freeze Protection
Heat/Cool Auto Switch-over
Heat/Cool Interlock
Programmable Setback Schedule
Pulse Width Modulation
Slab max. and min. settings with installed slab sensor
| Control | Microprocessor control. This is not a safety (limit) control |
| Packaged weight | 0.46 lb. (210 g) |
| Dimensions | 2-7/8" H x 2-7/8" W x 13/16" D (73 x 73 x 21 mm) |
| Enclosure | White PVC plastic |
| Approvals | CSA C US, meets class B: ICES & FCC Part 15 |
| Ambient conditions | Indoor use only, 32 to 122°F (0 to 50°C), RH ≤90% Non-condensing |
| Power supply | 24 V (ac) ±10%, 60 Hz, 3 VA |
| Relays | 24 V (ac) 2 A max, Class 2 |
| Sensors | NTC thermistor, 10 kΩ @ 77°F (25°C ±0.2°C) ß=3892 |
| -Optional | tekmar type #: 070, 072, 073, 076, 077, 079, 083, 084 |
| Warranty | Limited 3 Year Warranty |
In most cases the current version of literature will work, otherwise use the piece of literature most closely matching the date code of your product.
|
Product Submittal |
May 2011 - Present |
|
|
Installation & Operation Manual |
Sep 2009 - Present |
|
|
User Manual |
Sep 2009 - Present |