Below are the actual results of 12 homes retrofitted with tekmar House Controls.
|Location||Fuel Type||Usage (Gallons / CCF)||After Install Savings|
|E Haven, CT||Oil||836||529||37%|
|N Haven, CT*||Oil||1419||1147||20%|
|N Haven, CT||Oil||1200||600||50%|
|N Haven, CT||Oil||1650||1327||20%|
|W. Hartford, CT||Oil||857||572||33%|
|Stafford Springs, CT||Oil||1000||600||40%|
*Residence had a 1000 ft2 addition built at time of house control retrofit.
When the difference in yearly temperatures are factored in, savings were even higher.
Outdoor Temperature Reset saves energy by adjusting a boiler’s operating temperature according to the current outdoor temperature.
Indoor Temperature Feedback adjusts your boiler based on actual building indoor temperatures. This adjustment for heat loss & heat gains caused by people, appliances, the sun, wind or any other factor provides a much higher level of comfort & efficiency!
To learn more, watch the video.
EASY SELECTION: House Controls are selected to match mixing and zoning requirements. All models provide control of on/off or modulating boilers and DHW.
COMFORT: Indoor temperature feedback improves comfort by accurately maintaining the selected temperature.
EFFICIENCY: The system automatically adjusts boiler supply temperatures to match what the building actually needs.
NO CALLBACKS: There’s no need to fine tune the outdoor temperature reset curve later in the heating season. Indoor temperature feedback does this automatically!
COMMUNICATION: tekmarNet® communication offers more than improved system operation. It opens the door to remote accessibility.
|tN2 House Controls||400||401||402||403|
|On/off or modulating boiler|
|Domestic hot water operation|
|Zone valve outputs||4||-||4||-|
|Zone pump outputs||-||4||-||4|
|Fan /ERV/HRV stages||-||-||-||1|
Contact your local representative for assistance selecting the right products for your application.